User’s
Manual
of
ICA
‐
HM227W
71
4.9.2 Media
You can define what kind of media file should be saved on designated media.
Here are the descriptions of every setup item:
Item
Description
One Snapshot
Save a picture file when event is triggered.
"
NOTE
That this function will be enabled while “MJPEG
codec” is appeared on the “Video Setting”.
H.264 Video
Save a H.264 video clip. You can also select the recording length
before and / or after the time when event is triggered in
‘Pre Event’
and
‘Post Event’
.
For example, if you set
‘Pre Event’
to
‘10’
and
‘Post Event’
to
‘5’,
and an event is triggered at 14:10:30, then the video file will be 15
seconds long, starting from 14:10:20 to 14:10:35.
Tips: You may want to know what happened before event is
triggered in many cases, especially when object is outside of
motion detection window.
"
NOTE
If the “Pre Event” set to “0” second, the “Post Event”
cannot set to “0” second.
When you finish with above settings, click
‘Apply’
button to save changes.
