2 Mega-pixel PoE Plus Speed Dome IP Camera
ICA-E6260
71
Group
Description
Address
Translation
Provides information about the mapping between network addresses and
physical addresses for each physical interface.
For example, the IP/MAC addresses are to connect to the managed device.
IP
Provides the status and operation of Network Layer (Layer 3).
For example, the information and traffic flow of received/delivered package.
ICMP
Provides the status and statistics of ICMP.
For example, amount of receive/error message of ICMP.
TCP
Provides the status and operation of Transport Layer (Layer 4) using TCP
protocol.
For example, TCP Local Port and incoming/outgoing TCP segments.
UDP
Provides the status and operation of Transport Layer (Layer 4) using UDP
protocol.
For example, UDP Local Port and in/out datagram.
SNMP
Provides the related statistics through SNMP
3.8.6 RTP
The
RTP
section allows user to configure RTP Settings.
If the
RTSP Authentication
is “
Enabled
”, then the RTP streaming will require account name
and password authentication.
If the
RTP B2 Frame
is “
Enabled
”, then the B2 frame is added to every video frame,
containing an additional information, such as
motion detection status on each frame,
digital input and digital output levels, passive infrared status, other video intelligence
data, frame counter, frame-rate mode and the frame-rate, bitrate, resolution,
timestamp and much more
. The user side can operate with video data easily, including
event management, storage consumption estimation, image resizing for preview, etc.
After changing any of the items above, press
Apply
to save the changes. The
Reset
button
undoes the changes that had just been made but not Applied yet.