manualshive.com logo in svg

Planet Networking & Communication ICA-8500, User Manual, Page: 43 / 69

Share
Download
Planet Networking & Communication ICA-8500 User Manual Download Page 43

                                              5 Mega-pixel PoE / Wireless Fish-Eye IP Camera 

                                                                                                                                      ICA-8500/ICA-W8500

 

3.5.4 Multicast Tab

 

 

 

Multicast is a bandwidth conservation technology. This function allows several users to 
share the same packet sent from IP camera. To use Multicast, appoint IP Address and port 
here. TTL means the life time of packet. The larger the value is, the more users can receive 
the packet. 
 
To use Multicast, be sure to enable the function "Force Multicast RTP via RTSP"  in  your  media 
player. Then key- in the RTSP path of your camera: "rtsp://(IP address)/" to receive the multicast. 

3.5.5 IP Filter Tab

 

 

 
You can enter different user’s IP addresses which can be allowed or denied by the device. 

 

43

Summary of Contents for ICA-8500






































































Reviews:

No comments