manualshive.com logo in svg

Planet Networking & Communication ICA-510, User Manual, Page: 37 / 71

Share
Download
Planet Networking & Communication ICA-510 User Manual Download Page 37

4.2.3 MPEG4 – Mobile view 

 
This page will be displayed after clicking 

“Basic > Camera > MPEG4 > Mobile view”

 of 

the setting menu. 
 

 

 

RTSP 

RTSP port 

The RTSP (Real Time Streaming Protocol) is a standard for 
connected clients to control streaming data (MPEG4) over the World 
Wide Web. The default RTSP Port is 554. You can fill the RTSP Port 
number (1024~65535) in the field provided. 

RTP Unicast streaming 

Port range 

The RTP (Real Time Transport Protocol) is an Internet protocol for 
transmitting real-time data such as audio and video. The default port 
range is 9000 ~ 11999. You can fill the numbers (1024~65535) in the 
field provided. 

RTP Multicast streaming 

On / Off 

Enable / disable multicast streaming function. 

Multicast address 

Specify the multicast server address.

 

Video port 

Specify the transmission port number of the video data. You can fill 
the numbers (1024~65535) in the field provided. 

 

Dual Mode CCD Dome Internet Camera 

 

37

Summary of Contents for ICA-510








































































Reviews:

No comments