manualshive.com logo in svg

Planet Networking & Communication ICA-3350P, User Manual, Page: 14 / 67

Share
Download
Planet Networking & Communication ICA-3350P User Manual Download Page 14

 

3 Mega-pixel Remote Focus Bullet IR IP Camera 

ICA-3350P

 

 

 

14

 

5. Installing the

 

sun shield 

Use the screws in the package to fasten the sun shield above the IP camera. 

 

 

6. Installing IP camera on the wall 

Secure the bracket of the bullet camera on the wall. 

 

7. Powering on IP camera   

The IP camera could be powered on by power adapter or POE switch.

 

Power adapter:

 Plug in power adapter and connect to power source.   

After powering on, the camera will start to operate.

 

1.

 

Only use the power adapter supplied with Internet camera. Otherwise, the 

product may be damaged. 
2. The power adapter is unnecessary when Internet camera is connected to a PoE 
switch. Otherwise, the product may be damaged when Internet camera is 
connected to a PoE switch and power adapter simultaneously. 

 

POE: 

Power over Ethernet (PoE) is a technology that integrates power into a standard 

LAN infrastructure. It enables power to be provided to the network device, such as an IP 
phone or a network camera, using the same cable for network connection. It eliminates 
the need for power outlets at the camera locations and enables easier application of 
uninterruptible power supplies (UPS) to ensure a 24/7 operation. 

 

2.3 Initial Utility Installation 

This chapter shows how to quickly set up your H.264 camera. The camera is with the default 
settings. However, to help you find the networked camera quickly the windows utility PLANET 
Smart Discovery Lite can search the cameras in the network that will help you to configure 
some basic settings before you start advanced management and monitoring. 

Summary of Contents for ICA-3350P




































































Reviews:

No comments