manualshive.com logo in svg

Planet Networking & Communication ICA-3350P, User Manual, Page: 11 / 67

Share
Download
Planet Networking & Communication ICA-3350P User Manual Download Page 11

 

3 Mega-pixel Remote Focus Bullet IR IP Camera 

ICA-3350P

 

 

 

11

Chapter 2.  Hardware Interface 

2.1 Physical Descriptions 

2.1.1 Front View 

                     

 

Light Sensor

 

IR LEDs

 

Lens 

 

Item 

Description 

(1) Lens 

Keep the lens clean for excellent video quality. 

(2) IR LEDs 

Emits infrared light to provide light source in dark places 

(3) Light Sensor 

Detects the illumination level or the place where this IP camera is 
installed, and switches IR LEDs on when it’s required.   

When IR LEDs are switched on, this IP camera will switch to 
black and white video mode to enhance video quality. Do not 
cover light sensor or this IP camera will work in black and 
white mode only. 

 

(4) Micro SD Slot 

Inserting micro SD/SDHC card 
It supports a maximum 32GB micro SD card. To prevent damaging the 
card, please insert micro SD card before powering on IP cam.   

 

Summary of Contents for ICA-3350P




































































Reviews:

No comments