Planet Networking & Communication HDVR-1635 User Manual Download Page 67

Page: 67 / 93

Hybrid Digital Video Recorder

H.265 HDVR series

TCP Port

Router will automatically distribute TCP port for the device.

The port is needed when live view is made via CMS.

5.9.4 EMAIL

If the alarm is turned on or the alarm linkage photos are taken, send an email about the alarm

information and the photos to appointed address.

Picture 5.41 Email Setup

SMTP Server

Email server address. It could be an IP address or domain

name. Domain name can be translated only it is the correct

DNS configuration.

Port

Email server port number.

SSL

Decide whether using Secure Socket Layer protocol to login.

User Name

Apply the email server user name.

Password

Input the password corresponding to the user.

Sender

Set the email sender address.

Receiver

Send the email to appointed receivers when the alarm is

turned on. You can set three receivers at most.

Summary of Contents for HDVR-1635






























































































Search results

Summary of Contents for HDVR-1635

Reviews:

Related manuals for HDVR-1635

Brands by name

Popular brands

Planet Networking & Communication HDVR-1635, User Manual

Search results

Summary of Contents for HDVR-1635

Reviews:

Related manuals for HDVR-1635

Brands by name

Popular brands