720p SIP Multi-unit Apartment Vandalproof Door Phone with RFID & PoE
HDP-5260PT
31
QoS & VLAN
Field Name
Description
Link Layer Discovery Protocol (LLDP) Settings
Enable Learning
Function
Enables the telephone to synchronize its VLAN data with the Network Switch.
The telephone will automatically synchronize DSCP, 802.1p, and VLAN ID values
even if these values differ from those provided by the LLDP server.
Packet Interval
The time interval for sending LLDP Packets
Quality of Service (QoS) Settings
Enable DSCP
Enable or Disable Differentiated Services Code Point (DSCP)
Audio RTP DSCP
Specify the value of the Audio DSCP in decimal
SIP DSCP
Specify the value of the SIP DSCP in decimal
WAN Port VLAN Settings
Enable WAN Port
VLAN
Enable or Disable WAN Port VLAN
WAN Port VLAN ID
Specify the value of the WAN Port VLAN ID. Range is 0-4095
SIP 802.1P Priority
Specify the value of the signal 8021.p priority. Range is 0-7
Audio 802.1P Priority
Specify the value of the voice 802.1p priority. Range is 0-7
3.3.3 Web Filter
Web filter
The Web filter is used to limit access to the equipment. When the web filter is enabled, only the IP addresses
between the start IP and end IP can access the equipment.
Web Filter Table
Webpage access allows the display of the IP network list.
Web Filter Table Settings
To start and end IP address for MMI filter, click <add>.