Planar WN-5040-720, User Manual

Page: 142 / 153

131
Video standards for VIM NTSC
PAL
SECAM
HD 480p to 1080i
Component YPbPr
RS232 in
RS485 in and loop out
RJ45 connectors
Frequency
Dot clock 165 MHz
Horizontal frequency 120 Hz 56 Hz
Vertical frequency 91.1 kHz 31.47 kHz
Sync lock Will not lose sync lock with signal
inputs within stated frequency
range
Maximum input DC offset ±2V
AC requirements
Line voltage
115 V range 132V 90V 45–65 Hz auto-ranging, power factor
corrected
230 V range 254V 200V
Line current
115 V 2.0A 1.5A
230 V 1.2A 1.0A
Heat, BTUs per hour 550 BTU
Power consumption 160W
Optical
Specification Maximum Minimum Typical Notes
Viewable screen size
Diagonal 50" 1321 mm
Width 32.5" 826 mm
Height 17.5" 445 mm
Image position +½ pixel –½ pixel 0 pixel
After calibration on site
Rotation – ½ pixel +½ pixel 0 pixel
Pincushion/Barrel –2.5 pixel +2.5 pixel 1.5 pixel
Keystoning –½ pixel +½ pixel 0 pixel
Focus/Aberration No objectionable defocusing or
chromatic aberration at 1.5
screen diagonals by a 20/20
vision viewer
Screen
High Contrast Acrylic
Gain 1.5
Brightness, ANSI white 70 fL white boost off
95 fL white boost on
Viewing angle
Electrical and Heat
Specification Maximum Minimum Typical Notes