Display Controls
11
Function Menus
The following tables describe the main menus and submenus.
Monitor–Control Menu
Monitor-Control.
Allows you to adjust the display
characteristics such as the horizontal or vertical
position, display phase, display clock, and factory
reset. Adjusting these settings is necessary if the
results from the Auto Adjust function are not
satisfactory.
Pressing the Adjust PLUS or MINUS button displays
the Monitor-Control submenu. Use the Function
LEFT or RIGHT button to select a submenu item.
Auto-Adjust.
Select Auto-Adjust to set the display
parameters to optimum values.
H-Position.
Press the Adjust PLUS or MINUS button
to move the display image left or right on a horizontal
plane.
V-Position.
Press the Adjust PLUS or MINUS button
to move the display image up or down on a vertical
plane.
Phase.
Press the Adjust PLUS or MINUS button to
fine-tune the display image.
Clock.
Press the Adjust PLUS or MINUS button to
adjust the display pixel number alignment.
Reset.
Press the Adjust PLUS or MINUS button to reset
all the Monitor-Control submenu settings.
Graph/Text.
Press the Function Enter button to switch
between the text and graphic options.
Port-Select.
Switch between analog and digital mode;
if no signal comes the Auto-Detection function is
activated.
Exit.
Press the Adjust PLUS or MINUS button to exit
the Monitor-Control submenu.
