Planar UltraRes Series User Manual Download Page 84

Page: 84 / 104

Planar UltraRes Series User Manual

External Control

In addition to using the Planar UltraRes remote control and display, there are other
methods of controlling the Planar UltraRes display externally:

• Using a serial link to send ASCII commands and to receive responses to those

commands. The same set of commands can be sent over RS-232, USB, TCP or
UDP. See the

Planar UltraRes Series RS232 User Manual

for more information.

• Using discrete infrared (IR) codes to program a third-party remote control. See

"IR Command Protocol" on page 30.

• Using the Planar UltraRes Remote Monitoring software to access the settings in

the OSD as well as some additional features via a web browser. See "Planar
UltraRes Remote Monitoring Software" on page 70.

Summary of Contents for UltraRes Series









































































































Search results

Summary of Contents for UltraRes Series

Reviews:

Related manuals for UltraRes Series

Brands by name

Popular brands

Planar UltraRes Series, User Manual

Search results

Summary of Contents for UltraRes Series

Reviews:

Related manuals for UltraRes Series

Brands by name

Popular brands