Screen A Mode (for PC In)
Indisys Management System: Setup and Operation
24
Setup B Menu
1
Press MENU button to display
the MENU on the screen.
2
Select SETUP B menu. Press
to move to SETUP B menu.
Then press OK to go into the
SETUP B menu.
3
Select the sub-menu.
• Press
to move to the sub-
menu.
• Press OK to select a sub-menu.
4
Adjust the value
• Each of the values can be adjusted by pressing
5
Exit from the MENU.
• Press EXIT button to get out of the MENU.
6
Move the Main MENU.
7
Press MENU button to move the Main MENU.
Setup B Adjustments
Menu Item
Adjusts this
SERIAL CONTROL
Select LAN ON or LAN OFF
LAN SETTING
Configure the IP address of the set for control
via Ethernet
OSD
TURN OFF
H POSITION
V POSITION
ROTATION (of OSD)
INFO DISPLAY
TRANSPARENCY
Configures the OSD menu display
Turns off OSD after 5-120 sec of inactivity
OSD H position on screen
OSD V position on screen
Rotates OSD only to landscape/portrait
Select to display, or not, the information
OSD. The information will be displayed when
the input signal or source are changed and
give warning when the signal is out of range.
The displaying interval can be selected in the
range 3-10 sec.
Set the transparency of the OSD
OFF TIMER
Power off after 1 to 24 hours
SETUP B RESET
Initialize previously adjusted values of this
menu
FACTORY RESET
Initialize to factory defaults. All
configurations will be initialized.
