Maintenance and Filtration
To avoid problems with contamination, we recommend the installation of a fine filter unit of
20 µm.
The DV01 volume sensors are basically maintenance-free. However, it is advisable to
send the devices to the factory for inspection at certain intervals, especially in the case of
critical avoidance with high viscosity or very high loads. This avoids major damage, which
could be causes, for example, by blocking the bearings.
Return Shipment
When returning devices to the factory, please note that inspections and repairs will only be
carried out if a safety data sheet of the medium used is enclosed and the devices have
been flushed beforehand.
In case of non-observance, the goods will be returned carriage forward.
These precautions are taken to protect our personnel. Thank you for your understanding.
Electrical Connection
DV01 Instruction manual 09/2019
page 6
