~
53
~
11.
Connect the appliance to the mains properly.
12.
The nameplate is situated at the back of the appliance.
D
RUM
:
H
OW TO REMOVE THE PACKAGING FOAM
Remove the packaging foam inside the drum.
1.
Open the door of the appliance.
2.
Remove the adhesive strips from the
inside of the drum.
Do not use any aggressive or abrasive
detergents to remove residuals of the
adhesive strips.
3.
Remove the packaging foam (
X
/ 2 pcs.).
2.3 Levelling
1.
Install the appliance on a flat and solid ground only.
2.
Allow adequate distance to the floor to avoid
vibrations and noise.
3.
If the appliance does not stand horizontally, adjust
the 4 feet by turning them clockwise
/ anticlockwise until the appliance is level.
Do not put any blankets or ropes or piles of items on the floor. They could
generate heat so that the appliance will not properly work.
