38
2.
Hang the appliance on the screw heads. Insert the screw heads into the round
slots; then move the appliance so that the screw heads are in the narrow section
of the suspension. Tighten the 2 screws to ensure safe and proper positioning.
3.
Fix screws through the small safety holes to protect the appliance from
unintended moving.
2.5 Carbon filter
WARNING!
Before you install any carbon filters: switch the appliance
off and disconnect it from the mains.
You can order the carbon filter at
www.pkm-online.de!
Type name of the carbon filter: s. chapter T
ECHNICAL DATA
1.
Remove the aluminium grease filter.
2.
Install the carbon filter on the bottom side of the motor (bayonet catch).
3.
Reinstall the aluminium grease filter.
4.
Use carbon filters for extraction mode only.
WARNING!
Install the carbon filters safely and properly; otherwise
the carbon filters can loosen and cause hazardous situations.
NOTICE!
The suction capacity is decreased by installed carbon filters.
