56
2.4 Electrical connection
DANGER!
The appliance must be connected to the mains by a
qualified professional, who is familiar with and adheres to the local
requirements and supplementary regulations of your electricity supplier.
Instructions for the installer (qualified professional):
❖
The cooker is manufactured to work with three-phase alternating current
(400V3N~50Hz). Remember that the connection wire should match the
connection type and the power rating of the cooker. The connection cable must
be secured in a strain-relief clamp. The ground wire must be connected to the
marked clamp of the terminal. The electric supply of the appliance must be
equipped with an emergency switch with a distance between the contacts of at
least 3 mm which disconnects the entire appliance from the mains in a case of
emergency. Read the information on the rating label and the connection
diagram before connecting the appliance to the mains.
❖
When the socket is not accessible for the user
or a fixed electrical connection
of the appliance is required
, an all-pole disconnecting device must be
incorporated during installation. Disconnecting devices are switches with a
contact opening distance of at least 3 mm. These include LS-switches, fuses and
protectors (EN 30335).
➢
Move a screwdriver (1) slightly downwards (2) to open the box.
