50
Look at chap. T
ECHNICAL
D
ATA
for information about the climatic class
of your appliance. Your appliance can be operated in rooms with relevant
room temperatures as named below.
CLIMATIC CLASS
AMBIENT TEMPERATURE
SN
+10
0
→
+32
0
C
e.g. unheated cellar
N
+16
0
→
+32
0
C
inner home temperature
ST
+16
0
→
+38
0
C
inner home temperature
T
+16
0
→
+43
0
C
inner home temperature
3. Installation
Fix the plastic wall spacers (
depending on model
) on the condenser at the back
of the appliance to ensure a ventilation gap between the appliance and the wall.
The minimum distances required for proper ventilation can be found in chapter
3.2.
V
ENTILATION
.
3.1 Site
WARNING!
While unpacking, the packaging materials (polythene
bags, polystyrene pieces, etc.) should be kept away from children and
pets. CHOKING HAZARD! RISK OF INJURY!
1.
Unpack the appliance carefully. Dispose of the packaging as described in chapter
waste management.
2.
Completely remove the transport-protection (adhesive tape) of the accessories.
Be very careful and do not use any aggressive or abrasive detergents to remove
residuals of the transport-protection.
3.
Install the appliance in a suitable position with an adequate distance from sources
of heat and cold.
4.
If the appliance is positioned beside another fridge or freezer, leave at least a free
space of 2.0 cm between the appliances in order to avoid condensation.
5.
Check that the appliance and the power cord are not damaged.
