65
2.5 Electrical connection
Check that the voltage indicated on the rating plate matches the mains voltage of
your home
before
you connect the extractor hood to the mains.
Check that the extractor hood is installed properly
before
you connect the appliance
to the mains.
NOTICE!
Any damage caused by an appliance that is improperly connected
to the mains is
not
covered by the warranty or guarantee.
3. Recirculation mode / Extraction mode
3.1 Extraction mode
WARNING!
Do not lead the exhaust air into a chimney which is used for
extracting exhaust air of appliances operated by gas or other combustibles.
❖
The extractor hood is
usually
ready for the use in extraction mode (modifications
are possible).
❖
In extraction mode, the intake air is led through an exhaust hose to the outside. For
this purpose, an exhaust shaft or an outwardly leading exhaust pipe
must
be available
in your house / flat.
If your appliance is equipped with a carbon filter, you
must
remove the carbon filter
before
you operate the appliance in extraction mode!
If you want to use the extractor hood in extraction mode, please
always
observe the
instructions given in chapter 2. I
NSTALLATION
et seq.
and
in chapter 2.4.2
I
NSTALLATION OF THE EXTRACTOR HOOD
:
step 7.
«
E
XTRACTION
MODE
»
and
step
13
.
