PIXELHUE Flex-View F4, User Manual

Page: 14 / 146

Flex-View Event Presentation Switching Solution
User Manual
4 Overview
www.pixelhue.com 9
4.2 Control Overview
Three ways are provided for you to control the flex-view series switchers.
Front Panel
The F8 and F4 front panels both provide a 7-inch capacitive touchscreen that allows
for menu operations by fingertips. A front-panel USB port is provided for you to
update the firmware. For more information about the F8 and F4 front panels, please
refer to
5 Hardware Introduction .
The F4 Lite front panel comes with a power switch, a USB port and a dimmable
display that works with the knob and back button. Through the front panel menus,
you can perform basic system functions, such as factory reset, setting network
parameters and basic monitoring. A front-panel USB port is reserved for future use.
For more information about the F4 Lite front panel, please refer to
5 Hardware
Introduction .
Triton
The event management software Triton is an easy-to-use software developed by
PIXELHUE, allowing you to uniformly manage and control the flex-view series
switchers. The software consists of several menus and tabs that allow you to
configure the devices, inputs, outputs, screens and layers, as well as manage the
presets and Multiviewer.
Event Controller
The U3 event controller is a dedicated desktop console specifically designed to
support the flex-view series switchers. It runs from the same software as Triton.
4.3 Initial Inspection
General
Before shipment, the devices were inspected and found to be free of mechanical and
electrical defects. As soon as the devices are unpacked, inspect for any damage that
may have occurred in transit, and make sure there are no broken parts and the unit is
free of dents or scratches. Save all packing material until the inspection is
completed. If any damage is found, please contact PIXELHUE or your local distributor
immediately.
At delivery, the device is packed in a flight case. After unpacked, please always place
the device on a stable, flat and insulated support for handling or using.
Unpacking
After unpacking the device, it is recommended you check carefully to see whether all
accessories are included according to the provided packing list.