Flex-View Event Presentation Switching Solution
User Manual
9 Maintenance and Update
www.pixelhue.com
130
9.1 Device Maintenance
Note
The illustration takes the F4 Lite as an example. Other flex-view series switchers are
maintained in the same way as the F4 Lite.
9.1.1 Card Installation and Replacement
1.
Unfasten the screws that fix the card.
2.
Pull out the card with care.
3.
Insert the new card and fasten the screws to fix the new one in place.
Caution
All the cards can be only installed into the designated slots. Installing a card into an
incorrect slot will cause device failure. For specific information about card
installation, please refer to
9.1.2 Power Supply Replacement
1.
Press the dark red plate on the power supply module to unlock the module.
2.
Pull out the module with care.
3.
Insert the new module in place and the module will be locked automatically if
correctly installed.
