manualshive.com logo in svg

Pixapro PRO AC, Instruction Manual, Page: 6 / 6

Share
Download
Pixapro PRO AC Instruction Manual Download Page 6

97.6*49.9*36.95mm

A set: approx. 80g

Only receiver: 20g

57*30*26.5mm

Transmitter Dimension

Net Weight

Receiver Dimension

A set: approx. 70g

Only receiver: 10g

55*27*9mm

Model

PRO AC

PRO ST

-I

Fit flashes

PIXAPRO

 

CITI600, 

 

PowerCore, Hybrid360

 

Series Porable Flashes
Lumi, Storm Kino
S

eries studio flashes.

PIXAPRO

 

Li-ion

 

Speedlites

Fit cameras

Canon, Nikon, 

Pentax, 

Olympus, etc.

Includes

Transmitter   

Receiver 

PROAC

Transmitter   

Receiver 

ST-I

Troubleshooting

1. Unable to trigger a flash by pressing Test Button or the 

camera's shutter-release button.
Make sure batteries are installed properly and the trigger set 
is powered on.
Check if the transmitter and the receiver are set to the same 
channel. If not, set to the same position.
Check if the trigger set is securely seated into the camera's 
hot shoe.

2. Signal disturbance or shooting interference.

Change a different channel on the trigger set.

3. Short workable distance or flash missing.

Check if batteries are exhausted. If so, replace with new 
batteries.

Maintenance

1. 

Avoid sudden drops.

 The device may malfunction after 

strong shocks or impacts.

2. 

Keep dry.

 The device is not water-proof. Malfunction, rust, 

and corrosion may occur and the device may go beyond 
repair if immersed in water or expose

d

 to high humidity.

3. 

Avoid sudden temperature changes.

 Condensation may 

happen if the ambient temperature changes suddenly, for 
example, in a case when the trigger set is taken out of a 
build

ing

 with a high temperature to outside in winter. Please 

put the trigger set in a handbag or plastic bag beforehand.

4. 

Keep away from strong magnetic field.

 The strong static 

or magnetic field produced by devices such as ratio 
transmitters 

may 

lead to malfunction.

PRO AC 

            PRO ST-I

3V (2*AA Ni-MH or alkaline batteries )

 

5V (powered by flashes)

2.4GHz wireless remote system

Over 100m / 328ft (open areas)

Flash power ratio

Modeling lamp or AF-assist beam on/off

 

Buzzer on/off

Power-ratio display mode

Flash triggering

1/250 second

16

Model

Transmitter Power Supply

Receiver Power Supply

Transmit

ion

 Frequency

Workable Distance

Control on Flashes

Max. Sync. Speed

Channel

s

Technical Data

Summary of Contents for PRO AC







Reviews:

No comments