Piusi F00214000, Installation, Use And Maintenance Manual

Page: 13 / 124

13
/124
EN
This manual is the property of PIUSI S.p.A. Any reproduction, even partial, is forbidden.
PIUSI P 3.5 - PIUSI P 5.5
INSTALLATION
12.
¦ The “
PIUSI P 3.5 - PIUSI P 5.5
” dispensing system is for professional use
only.
¦ According to the current legislation, the “
PIUSI P 3.5 - PIUSI P 5.5
”
dispensing system must be installed in premises that are sufficiently well-lit.
¦ It is compulsory to adhere completely to the safety and fire regulations in
force in the place of installation.
ATTENTION
All installations must be carried out by authorised and competent
personnel only. Authorised persons must:
¦ install the system in dry and well-ventilated place;
¦ ensure the correct installation of equipment required for the
correct functioning of the pump.
Altering or modifying the dispensing device is strictly forbidden. PIUSI
S.p.A. accepts no responsibility for damage to persons, property or the
environment caused by failure to comply with this requirement.
The installer is responsible for equipping the system with the required
accessories for safe and correct operation of the device. The selection
of accessories unsuitable for use may cause serious damage/injury to the
device and/or individuals.
Do not use the device if important parts of the device, accessories or
safety devices are damaged. Make the necessary replacements and repairs
immediately.
WARNING
It is absolutely forbidden to replace the oil delivery nipple with other
commercial connectors
WARNING
Foreword The “ PIUSI P 3.5 - PIUSI P 5.5 ” dispensing system is designed and
predisposed for wall-mounting (ST versions) or mounting directly
on the oil drum (940 versions). In both cases, however, it must be
mounted in a secure, stable manner.
Authorised
installation
personnel