M0502
24
/28
Installaltion, use and maintenance
16 MAINTENANCE
Safety warnings
The distribution system has been designed and built to require minimum main-
tenance.
Before carrying out any maintenance work, disconnect the dispensing system
from any electrical and hydraulic power source.
During maintenance procedures, using personal protection equipment (PPE) is
mandatory.
Always consider the following recommendations to use the pump correctly.
Personnel authorised
to perform mainte-
nance procedures
Maintenance procedures must be performed exclusively by qualified personnel.
Any misuse may lead to a decline in performance, danger for people and/or
things, besides voiding the warranty.
Interventions to be
performed
Whenever there is risk of frost, empty the circuit and the pump, taking care
to place the pump in an environment where the temperature is no lower than
0°C/32°F. Check that the labels and plates found on the dispensing system do
not deteriorate or become detached over time.
ONCE A WEEK
- Check that the pipe connections are not loose to prevent any leaks
- Keep the parts free from obstructions due to dirt or crystallization:
1
2
1 - n° 2 END OF FILLING sensors: these are used
to stop product delivery.
2 - DRIP-STOP VALVE: prevents spills and drip-
ping.
ONCE A MONTH
- Check the pump body and keep it clean and free of any impurities
- Check that the electrical supply cables are in good condition
