Page 4
SKU 97143
For technical questions, please call 1-800-444-3353.
unpacking
When unpacking, check to make sure that the item is intact and undamaged. If
any parts are missing or broken, please call Harbor Freight Tools at the number shown
on the cover of this manual as soon as possible.
Operating instructiOns
read the entire Warning section at the beginning of this manual
including all text under subheadings therein before set up or use of this
product.
This Service Kit will work with most model vehicles. See page 6 for a description
of which components will work with your make and model.
Read the vehicle owner’s manual to
determine which Disc and Thrust Bolt to
use.
Move the T-handle of the Thrust bolt to
one side and slide the plate over the
Thrust Bolt, until it rests on the bottom.
Apply the Disc to the two pegs on the
bottom of the Thrust Bolt (the magnet
will hold it in place).
Raise and safely secure vehicle.
Remove the wheel and brake caliper.
Remove the worn brake pads and hard-
ware.
Service the caliper according to the vehicle manufacturer’s instructions.
Reassemble caliper, brake pads, and wheels.
Clean, then store the Service Kit indoors out of children’s reach.
Warning!
Test the brakes thoroughly before use.
1.
2.
3.
4.
5.
6.
7.
8.
9.
thrust Bolt
(1-1 or 1-2)
caliper
piston
disc (1)
thrust Bolt
(1-1 or 1-2)
caliper
piston
disc (1)