Page 3
For technical questions, please call 1-888-866-5797.
Item 58641
11. Reposition Flaring Cone over tubing and
screw the Yoke down again on the end of
the tube until the tubing folds back on itself,
forming a 45 degree double flare.
Flaring
Cone
Tubing
12. Loosen the Yoke, and the wing nuts. Remove
the Yoke and Flaring Bar from the tube.
13. Clean and lightly lubricate the tool, and
store it out of reach of children.
Maintenance and Servicing
1.
Before each use,
inspect general condition
of tool. Check for misalignment or binding of
moving parts, cracked or broken parts, and
any other condition that may affect its safe
operation.
Do not use damaged equipment.
2.
After use,
clean external surfaces. Then dry and
lubricate all moving parts. Do not use solvents.
3.
When storing,
keep Flaring Tool and
its accessories in its Carrying Case and
store in a clean, dry, safe location.
4.
CAUTION!
All maintenance, service, and repairs
not mentioned in this manual must only be
performed by a qualified service technician.
Parts List and Diagram
Part
Description
Qty
1
Flaring Bar
1
2
Clamp Bar
1
3
Yoke
1
4
Bar Screw
2
5
Pin
2
6
Wing Nut
2
7
T-Handle
1
8
Flaring Cone
1
9
Yoke Screw
1
10
Retaining Ring
1
11
Steel Ball
1
12
Flat Washer
2
13
Adapter, 5/16" M8
1
14
Adapter, 3/8"
1
15
Adapter, 1/2"
1
16
Adapter, 3/16" M4.75
1
17
Adapter 1/4"
1
18
Carrying Case (not shown)
1
Record Serial Number Here:
Note:
If product has no serial number, record
month and year of purchase instead.
Note:
Some parts are listed and shown
for illustration purposes only, and are not
available individually as replacement parts.
Specify UPC 193175443113 when ordering parts.
9
7
13
14
15
16
17
3
5
10
11
8
4
1
2
12
6