59893 V0810
User Guide
AP Dragster
Launcher
Page 1: ...59893 V0810 UserGuide AP Dragster Launcher...
Page 2: ...ng 3 Place the spring in the middle of the double posts on the finish plate Thread one paper clip through a double post on one side Figure 2 Do the same on the other side with the other paper clip The...
Page 3: ...adjust the finish plate to make sure the line is taut the spring tensioner will even out the tension between the two lines If the finish plate moves you can put a book on it to hold it in place Runnin...
Page 4: ...of the track either unhook the string loop from the paper clip at the finish plate or unhook the loop over the post on the launcher Replacing the Brass Tubes If the brass tubes on your AP Dragster La...
