Pitney Bowes SendPro C series Operator'S Manual Download Page 199

Page: 199 / 232

Unable to print Trackable Labels

Issue

The SendPro® C-Series will not print a Trackable Label and no error message is presented.

Cause

There may be a problem with the printer

The wrong label size may be selected

The top cover may be open

Resolution

Change the default label size

1. Tap

Settings

(gear icon).

2. Swipe down and select

Label Options

3. Change the format to

Roll - 4 x 6

If the printer has a solid green light

1. Make sure that the USB cable is plugged in to both the printer and SendPro C-Series.

2. Restart the meter:

a. Unplug the power cord.

b. Wait for the display to turn off.

c. Wait one minute and turn the power back on.

The printer has a flashing red light

Make sure that the labels are correctly loaded and aligned.

Make sure paper sensors are clear from any dust or debris.

Make sure that the top cover is fully closed.

Troubleshooting

Pitney Bowes

Operator Guide

June 2018

199

Summary of Contents for SendPro C series









































































































































































































































Search results

Summary of Contents for SendPro C series

Reviews:

Related manuals for SendPro C series

Brands by name

Popular brands

Pitney Bowes SendPro C series, Operator'S Manual

Search results

Summary of Contents for SendPro C series

Reviews:

Related manuals for SendPro C series

Brands by name

Popular brands