Pitney Bowes Relay 2500 User Manual Download

Page: 69 / 182

Confirming Job Setup

Job setup is now complete. Using the inserter model and icons, the touchscreen display shows all of the
selected job settings.

1. Review the job settings.

2. Tap the

and

buttons to scroll back and change a setting.

3. When the setup changes are complete, tap the

Setup

button to accept the new settings and exit

setup mode.

The touchscreen displays the new job settings with the message Trial Piece Required.

4. Test the setup by

running a trial piece

NOTE

: The inserter retains job settings until they are changed or deleted, even when the power is

disconnected.

Product Overview

Pitney Bowes

Relay™ 2500, 3500, 4500 User Guide

December, 2018

Page 62 of 174

Summary of Contents for Relay 2500






















































































































































































Search results

Summary of Contents for Relay 2500

Reviews:

Related manuals for Relay 2500

Brands by name

Popular brands

Pitney Bowes Relay 2500, User Manual

Search results

Summary of Contents for Relay 2500

Reviews:

Related manuals for Relay 2500

Brands by name

Popular brands