Pitney Bowes Relay 2500 User Manual Download

Page: 62 / 182

Setting the Sealer

This setting appears on non-scanning jobs only if insertion mode is turned on. Decide if you want to seal
envelopes and set the sealer.

1. Tap the

and

–

buttons to toggle the option to

Off

Icon

Option Description

Turns the sealer unit on for automatic sealing of envelopes. Make sure the sealer bottle is

full of E-Z Seal®.

Off

Turns the sealer unit off. Envelopes will be ejected unsealed.

2. Tap the

button to accept the option and advance to the next setting.

If you selected either of the sheet feeders, continue to the

Setting the Paper Length

If you are using the insert feeder only, folding is not possible; skip to

Setting Envelope Depth

Product Overview

Pitney Bowes

Relay™ 2500, 3500, 4500 User Guide

December, 2018

Page 55 of 174

Summary of Contents for Relay 2500






















































































































































































Search results

Summary of Contents for Relay 2500

Reviews:

Related manuals for Relay 2500

Brands by name

Popular brands

Pitney Bowes Relay 2500, User Manual

Search results

Summary of Contents for Relay 2500

Reviews:

Related manuals for Relay 2500

Brands by name

Popular brands