Pitney Bowes Relay 2500 User Manual Download Page 51

Page: 51 / 182

Initiating Job Setup

Log in

2. From the main screen, tap the

Setup

button. The

Enter Access Code:

field displays over the

inserter model and the keypad appears on the touchscreen display.

3. Using the keypad, type the Supervisor code (71) and tap the

Enter

key. The

Enter Access

Code:

field counts up or down to display the password code entered.

Item Description

Setup Button

Keypad

Job Options and Settings

Enter Key

Fast Scroll Buttons*

Enter Access Code Field

* These keys are used as a fast forward to move through large changes in job setup settings

4. Tap

to accept the access code and advance to the job settings.

Product Overview

Pitney Bowes

Relay™ 2500, 3500, 4500 User Guide

December, 2018

Page 44 of 174

Summary of Contents for Relay 2500






















































































































































































Search results

Summary of Contents for Relay 2500

Reviews:

Brands by name

Popular brands

Pitney Bowes Relay 2500, User Manual

Search results

Summary of Contents for Relay 2500

Reviews:

Brands by name

Popular brands