Pitney Bowes Relay 1000, Operator'S Manual

Page: 22 / 64

2 • System Setup
2-6 SV63176 RevB
Loading the Envelope Feeder (Feeder B)
1. Always fan (aerate) envelopes
before you load them. This
prevents them from sticking
together.
2. Tap the stack of envelopes
onto a firm surface to align the
edges.
3. Place the envelope stack
into Feeder B with the last
envelope flat against the
feed belts. You do not need
to “shingle” or stagger the
envelope stack. The feeder
can hold up to 60 envelopes.
IMPORTANT!
Load envelopes right way up and facing you. This means
that the envelope flap is on the back of the envelope and at the top. Any
other orientation will prevent the machine from inserting properly.
4. Slide the two side guides up
to the envelope stack then
slightly back them off. Use the
blue handles at the rear of the
guides when moving them.
IMPORTANT! The setting is correct when the guides do not restrict the
envelopes feeding into the system or cause them to feed at an angle
(skew).