Pitney Bowes Relay 1000, Operator'S Manual, Page: 10 / 64

1 • System Overview
1-4 SV63176 RevB
Component Identification
1 2
3
4
5
6
7
12
11
10
9
8
1
Insert Cover E Release Button (Blue Button Marked E)
The display prompts you to press this button to open this cover
when you need to remove jammed material
2
Insert Feeder (not on all models)
Use this feeder to add inserts to your envelope. Material fed from
this feeder cannot be folded by the system. However, this feeder
is especially suited to pre-folded or thicker inserts.
3
Slot for Operator Guide
Store the Operator Guide in the slot provided so that it is readily
available when you need it.
4
Control Panel
This is where you enter commands and where the system
informs you of its status. See the Systems Controls section of
this chapter for a functional description of each button.