![background image](http://html1.mh-extra.com/html/pitney-bowes/epic/epic_manual_1559761049.webp)
Assigning an MRDF File (File Based Jobs)
If you are running a file based job, you need to assign an MRDF file to the job. The MRDF is a data file
that contains a set of information used for processing the mail (i.e. number of pages, number of
collations, etc.). If this is not a file based job, you can skip this step.
1. Click on the
Menu
button on the bottom of the main DC screen, near the Start bar.
2. Select
Open File
or
Start Job
from the drop-down menu.
3. In the
Select Mailrun
field, type in the name of the MRDF file or scan it from the work order.
4. When the file name populates the field, click
OK
to open it.
Using Direct Connect
Pitney Bowes
Epic Select Operator Guide
December, 2017
Page 43 of 288
Summary of Contents for Epic
