Pitney Bowes Epic Manual Download Page 248

Page: 248 / 295

Vertical Stacker Maintenance

Perform these maintenance activities daily.

Note:

All routine maintenance must be performed with the system logged off.

Required Tools

Soapy water

Clean cloths

Compressed air

Cleaning Stacker Cover and Clearing Paper Path

1. Lift the vertical stacker cover.

2. Inspect the deck and rollers for glue buildup and toner; wipe down with damp, clean cloth and

soapy water.

3. Use the airline with the blower attachment to blow dust and debris out of the paper path.

4. Close the cover.

Maintenance

Pitney Bowes

Epic Select Operator Guide

December, 2017

Page 242 of 288

Summary of Contents for Epic







































































































































































































































































































Search results

Summary of Contents for Epic

Reviews:

Related manuals for Epic

Brands by name

Popular brands

Pitney Bowes Epic, Manual

Search results

Summary of Contents for Epic

Reviews:

Related manuals for Epic

Brands by name

Popular brands