Pitney Bowes Epic Manual Download Page 191

Page: 191 / 295

Adding Sealer Fluid

The sealer uses water to seal envelopes. the sealer tank holds five gallons of water. DC displays a

Supply Low [Water Tank] @ Sealer

message when the sealer tanks needs to be refilled.

If the sealer tank is not refilled, eventually the sealer brush detects no water flow, and the system stops.

1. Fill a container (that has a funnel or spout) with fluid.

2. Open the sealer reservoir cover.

3. Carefully pour water into the reservoir; do not overfill the container.

4. Close the sealer reservoir cover.

Item Description

Sealer Reservoir

(cover open)

Overflow Reservoir

(partially pulled out)

Sealer and Overflow Reservoirs

Running the System

Pitney Bowes

Epic Select Operator Guide

December, 2017

Page 185 of 288

Summary of Contents for Epic







































































































































































































































































































Search results

Summary of Contents for Epic

Reviews:

Related manuals for Epic

Brands by name

Popular brands

Pitney Bowes Epic, Manual

Search results

Summary of Contents for Epic

Reviews:

Related manuals for Epic

Brands by name

Popular brands