Pitney Bowes Epic Manual Download Page 180

Page: 180 / 295

Loading the Envelope Feeder

Outside carrier envelopes need to be loaded on the envelope feeder correctly for the feeder to work right.

To load the envelope feeder:

1. Raise the envelope feeder paddle and slide it down toward the right side of the feeder (facing it).

2. Place envelopes in the feeder, flap side down, with the flap facing out to the right.

Envelopes Positioned in the Feeder

3. Verify the tops of the envelopes are squared up and no envelopes are sticking out from the stack or

stuck together.

Running the System

Pitney Bowes

Epic Select Operator Guide

December, 2017

Page 174 of 288

Summary of Contents for Epic







































































































































































































































































































Search results

Summary of Contents for Epic

Reviews:

Related manuals for Epic

Brands by name

Popular brands

Pitney Bowes Epic, Manual

Search results

Summary of Contents for Epic

Reviews:

Related manuals for Epic

Brands by name

Popular brands