Pitney Bowes Epic Manual Download Page 11

Page: 11 / 295

Maintenance

Operators must understand and adhere to safety precautions when working with the equipment.

Only qualified service personnel should service this equipment per local national requirements.

Service that requires removal of protective covering is performed by qualified service personnel.

Only setup maintenance, as described in the information provided, is to be performed by
operators.

A setup tool is supplied for adjustments to accommodate different size paper on the inserter.

Use only Pitney Bowes approved printer ink and cleaners.

To prevent overheating, do not cover the vent openings.

Do not

store flammable fluids inside this machine.

Do not

place any container with liquid on this machine, (i.e. coffee cups, soda, etc.)

Do not

use flammable cleaners in this machine.

Do not

use aerosol air canisters. It is recommended that a vacuum cleaner be used to remove dust

and debris from the machine paper path. If you have to use shop air, turn the system off

before

you

begin cleaning. Verify the shop air

does not contain excessive oil or water

Do not

spray liquid onto or into any part of the machine. Use a cloth to apply cleaning solution.

Safety

Pitney Bowes

Epic Select Operator Guide

December, 2017

Page 5 of 288

Summary of Contents for Epic







































































































































































































































































































Search results

Summary of Contents for Epic

Reviews:

Related manuals for Epic

Brands by name

Popular brands

Pitney Bowes Epic, Manual

Search results

Summary of Contents for Epic

Reviews:

Related manuals for Epic

Brands by name

Popular brands