Pitney Bowes Epic v3.1, Operator'S Manual

Page: 135 / 336

Adjusting the Rotary Feeder Separator Pins
The separator pins in the rotary feeder prevent multiple pieces of material from being pulled into the
feeder at once.
There are four separator pins located on the center gate. The two inner pins are closest to the center of
the gate and the two outer pins are closer to the suction cups.
l
Inner pins - used for most material
l
Outer pins - used for unusual inserts (booklets) to allows the staple to miss the pins
Rotary Feeder Separator Pins (outer pins shown here)
Operator Adjustments
Pitney Bowes Epic v3.1 (ZVE0) Operator Guide May, 2018 Page 128 of 328