Pitney Bowes EDGE 7.11, Reference Manual

Page: 696 / 896

Davox Davox Server Communication
Telephony Gateway Reference Manual 696
2. Copy the tp2un program to a new name for each EDGE it com-
municates with. The new name should follow the following
pattern:
tp2un suffix
3. Copy the tpun_server program to a new name corresponding
to the new tp2un script. The suffix added to the tp2un script
should be added to the tpun_server name as follows:
tpun suffix _server
4. Set the Input paths/TCP ports in the UN_DEFAULT variable of
each copy of the tp2un program to correspond with the EDGE
device settings.
For example, assume you have two EDGE installations, one produc-
tion and one test. The input TCP port specified in the EDGE Tele-
phony Device setup for the production system is 8200. The input TCP
port specified in the EDGE Telephony Device setup for the test sys-
tem is 8210. The tp2un program is copied to tp2untest, which has
been modified to use 8210 for the input TCP port. The tpun_server is
copied to tpuntest_server.
To start the two tpun_servers to communicate with the production
and test EDGE installations, enter the following two commands:
tp2un start
tp2untest start.