manualshive.com logo in svg

Pitney Bowes EDGE 7.11, Reference Manual

Share
Download
Pitney Bowes EDGE 7.11 Reference Manual Download Page 694

Davox

Davox Server Communication

Telephony Gateway Reference Manual

694

Server Restart

By default, a delay is required between stopping and restarting the
Davox gateway servers to allow for the sockets to flush all messages
and close. To force the sockets to flush immediately so the Davox
gateway servers can be quickly restarted, set the environment vari-
able FLUSH_SOCKETS to 1. AIT recommends this environment vari-
able be added to tp2un script or the .profile of the user ID who will
be starting the Davox Gateway servers. The syntax is typically
FLUSH_SOCKETS=1; export FLUSH_SOCKETS.

Server Shutdown

The Davox Gateway servers do not need to be stopped when the
generic set of telephony servers is stopped. The servers must be
stopped from the directory in which they were installed, unless a
path is set to that directory. To stop the Davox gateway servers, exe-
cute the following from a UNIX prompt:

tp2un stop

All Davox Gateway servers are terminated with this command.

Server Log Files

The messages for the Davox Gateway servers are written to log files.
These log files reside in the directory from which the tpun_server
was started, unless the environment variables TPHNY_LOG_PATH or
TMPDIR are set in the tp2un script to redirect them. The log files are
moved in the same fashion as the other log files. For more informa-
tion, see the section 

Telephony Logs

.

Summary of Contents for EDGE 7.11

































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands