Pitney Bowes EDGE 7.11, Reference Manual

Page: 243 / 896

Dialer Setup Callset Area
Telephony Gateway Reference Manual 243
This property is only used with EDGEdial for Aspect and
EDGEdial for Aspect Contact Server.
Setting bits for
ANS_MAP Sets the options for the ANS_MAP command. Each
option represents a call result other than a live answer
(for example, a SIT tone). Enabling the bit for an
option specifies that calls with that outcome should
be routed to an agent; disabling the bit indicates calls
are disconnected.
This property is only used with EDGEdial for Aspect and
EDGEdial for Aspect Contact Server..
Bits 1 through 8 are valid SIT tones only for North
America; bits 15 - 17 are only valid for trunk lines using
answer supervision.
To enable any item in the list box, select the checkbox
Set bit on . To disable an item, select Set bit on a second
time.
Set bit on can be enabled or disabled for the following
options:
Beep tone
failed A b e e p t o n e w a s d e t e c t e d , b u t
answering machine detection is off
(bit 13).
Properties: (continued)