
Dialer Setup
Callset Area
Telephony Gateway Reference Manual
174
For example, assume there is a
request for 50 calls. The callset con-
sists of queues A, B, and C, each with
a limit of 25. EDGE sends 25 calls
f r o m q u e u e s A a n d B f o r e a c h
request. No calls are sent from
queue C until either queue A or B
runs out of calls. If the limit for
queue A were set to 50, all calls
would be pulled from queue A until
it ran out of calls.
Sequential
until queue
is exhausted
The dialer transfers call events from
the each queue in turn, until that
queue is empty.
For example, assume there is a
request for 50 calls. The callset con-
sists of queues A, B, and C. EDGE
transfers 50 calls from queue A until
it is empty. Then the process repeats
with queues B and C.
Close callset on
last signoff
Specifies whether to close the callset when the last
user signs off the callset. If checked, the campaign is
closed when the last user logs out.
Properties: (continued)
Summary of Contents for EDGE 7.11
