7-11
7 • System Options
SV62415 Rev. B
Changing the Lock Code
You can change the Lock Code if it has been enabled.
1. Press
Menu
.
2. Select "Setup".
3. If necessary, press the green down arrow key to scroll through
the menu screens.
4. Select "Lock Code/Password".
5. Select "Change Lock Code".
6. When prompted, enter the current Lock Code and select "Ac-
cept".
7. Enter the new Lock Code, and select "Accept".
8. Re-enter the new Lock Code to confirm and select "Accept". At
the "Lock Code Enabled" message, select "OK".
Enabling the Supervisor Password
The Supervisor Password prevents unauthorized access to account-
ing setup.
1. Press
Menu
.
2. Select "Setup".
3. If necessary, press the green down arrow key to scroll through
the menu screens.
4. Select "Lock Code/Password".
5. Select "Enable Password".
5. Enter the new Supervisor Password and select "Accept".
6. Re-enter the new Supervisor Password to confirm and select
"Accept".
7. At the "Password Enabled" message, select "OK".
Change Password
Enter New Password
***_
◄ Accept
Basic Options
Enabling, Changing or Disabling Lock Codes and Passwords
