manualshive.com logo in svg

Pitney Bowes DM475 series, Operator'S Manual

Share
Download
Pitney Bowes DM475 series Operator'S Manual Download Page 91

7-3

7 • System Options

SV62415 Rev. B

Setting the Time

Sometimes, the time on the machine may need to be corrected due 

to internal drift. To change the time for Daylight Saving Time, see 

Setting Daylight Saving Time

 in this chapter.

1. Press 

Menu

.

2.  Select "Setup".
3.  Select "Time and Timeouts".
4.  Select "Correct Time Drift".

i

 

NOTE

:

 You can add/subtract up to 120 minutes (2 hours) 

from the current time.

5.  Key in the new time and select "Accept".

6.  Select "Yes". The display returns to Time & Timeouts menu.

Correcting Time Drift

Current Time:  1:38 PM

Enter Time

       :  

(11:38 AM - 3:38 PM)

◄ Accept

Earliest time 

you can set 

Latest time 

you can set

Setting the Time, Date, and Timeouts

You can change the system time/date, set the time/date to daylight 

saving time, change the time at which your system advances the 

date/time to the next day, and set the amount of time your system 

can remain inactive before reverting to the Normal Preset values.

Basic Options

Summary of Contents for DM475 series



























































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands