3-12
3 • Running Mail
SV62415 Rev. B
Processing a Parcel Using the Optional Parcel Rate Module
The following outlines the procedure for processing a parcel using
the optional Parcel rate module.
1. Place your mail piece on the integrated weigh platform or enter
the weight manually through the following steps:
a. Press the
Weigh/Rate
button and then select “Enter Weight
Manually”.
b. Enter the weight in kilograms and then press
Enter
or
choose
Accept
to confirm and the system will take you to
the class selection option menu (skip to step 3).
2. If you used the integrated weigh platform to weigh your mail
piece, you will be prompted to select the
Class
.
Additional sub-class selections and processing steps are required
depending on which class selection, and country destination
(Domestic, US, International) you select. The steps for the different
country destinations are outlined below.
Domestic (Canada) Destinations
3. Press the
Class
key. Select "Package Svcs". Press the down
arrow, if necessary, to bring Package Svcs into view. Select the
class of mail.
4. When prompted, select "Post Code". Enter the destination Post
Code using the QWERTY keyboard and/or the numeric keypad.
5. Select special services, if any. Press the
Enter
key when done.
6. The barcode label will print. Place the barcode label on the mail
piece on the same side as the destination address.
7. Press the
Tape
key. Apply the postage tape to the barcode label.
8. To send another package, answer Yes when prompted to "Enter
Another Package". Place the mail on the scale and repeat steps
3 to 7.
Processing Parcels
