manualshive.com logo in svg

Pitney Bowes DM475 series, Operator'S Manual

Share
Download
Pitney Bowes DM475 series Operator'S Manual Download Page 38

3-8

 

3 • Running Mail

 

SV62415 Rev. B

Processing Lettermail Using Manual Weight Entry

1.  If you have the optional accounting feature, from the home  

screen select 

Account 

and choose an account.

2.  At Home screen, press the 

Weigh/Rate

 button and then choose 

“Enter Weight Manually”.

3.  Enter weight in grams or choose the 

Enter Weight in Kilograms

 

option to enter weight in kilograms and then press 

Enter 

or 

choose “Accept”.

4.  Based on your meter configuration you will be prompted to 

perform 4a and 4b or skip ahead to 4b:

a)  Select Letters to process Lettermail.
 b)   Select the desired sub-class (e.g., Domestic 

Standard, Domestic Other, USA, etc.) by pressing the 

corresponding key next to the display.

5.  Select any desired special services (e.g., Registration) by 

pressing the corresponding key next to the display. If no special 

services are required press 

Enter

.

6.  The screen will now display the postage amount in the top right 

hand corner with three lines on the left and right side. You are 

now ready to print the postage.

7.  Place envelope in feed deck to print postage (see section 3-9 on 

Feeding Envelopes for additional instructions). 

Manual Weight   

    $0.57

10 g 

 

          2010.06.08

 Account 

:  None

 Class   

:  Dom Standard

 AD 

 

:  None

 Inscrip. 

:  None

Processing Lettermail

Ready

Summary of Contents for DM475 series



























































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands