manualshive.com logo in svg

Pitney Bowes DM475 series, Operator'S Manual

Share
Download
Pitney Bowes DM475 series Operator'S Manual Download Page 147

11-7

11 • Maintenance

SV62415 Rev. B

Cleaning the Printer Nozzle

This option allows you to purge the print heads in an effort to fix a 

printing problem
1. Press 

Menu.

2.  If necessary, press the green down arrow key to scroll through 

the menu screens.

3.  Select "Maintenance".
4.  Select "Printer Maintenance".
5.  Select "Clean Printer Nozzle".
6.  You have a choice of four purges to use. Normally selecting 

"Purge A" is sufficient to purge the system, unless directed by a 

Pitney Bowes agent to do otherwise.

7.  The system executes a purge. This may take a few moments. 

When finished, the Cleaning Complete screen displays.
•  Select "

Print Test Pattern

" to print a test pattern. See 

Printing 

a Test Pattern

 in this chapter for more information.

•  Select "Select Another Purge" to choose a different purge.
•  Select "Done" to return to the Printer Maintenance menu.

Clean Printer Nozzle 

Select Purge

◄ Purge A
◄ Purge B
◄ Purge C
◄ Purge D

Printer Maintenance

Replace Ink Tank Cartridge

This option allows you to replace the ink tank cartridge. See "Replac-

ing the Ink tank cartridge" at the start of this chapter.

Summary of Contents for DM475 series



























































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands