manualshive.com logo in svg

Pitney Bowes DM475 series, Operator'S Manual

Share
Download
Pitney Bowes DM475 series Operator'S Manual Download Page 118

8-14

 

8 • Standard Accounting Option

 

SV62415 Rev. B

Printing on an Envelope or Tape Strip

1. Press 

Menu

.

2.  Select "Reports".
3.  Seelct "Accounts"
4.  Select the appropriate report from the list. You may need to 

press the down arrow key to view additional reports.

i

 

NOTE

:

 If you have an attached printer, but want to print on 

an envelope or tape strip, select "Mailing Machine" when 

prompted.

• 

Print on an automatically fed envelope: 

Load envelopes into 

the feeder and press 

Start

.

i

 

NOTE

:

 If this is a multi-page report, you will be prompted 

to insert another envelope.

• 

Print on a tape strip:

 Press 

Tape

. You will be prompted to 

print another report once printing is complete (see samples 

on next page). 

•  Select "Yes" to print an additional report. 
•  Select "No" to return to the Home screen.

Printing Account Reports

Summary of Contents for DM475 series



























































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands