Pitney Bowes Connect+ 1000 Operator'S Manual Download Page 140

Page: 140 / 349

Reprinting a FedEx or UPS shipping label

Note:

You can reprint a FedEx shipping label once within 24 hours after printing it the first time.

You can reprint a UPS shipping label once within 24 hours after printing it the first time.

To reprint a shipping label you’ve just printed:

1. On the

Carrier

screen you will see the message "Label Completed" .

2. Click the

Reprint This Label

link next to the "Label Completed" message.

3. You’ll see a

Reprint Label

dialog box with some conditions. If you agree to them, check the check

box.

4. Click the

Reprint

button.

To reprint from the

History

screen:

1. Select the

History

button in the Shipping tile on the Home screen.

2. This opens the

History

screen displaying all of your recent shipments.

3. Find your label in the list or by using the search box (refer to How to search for a shipment in

SendPro).

4. To reveal the shipment's details click the

View

link or the

arrow in the left of the column list, next

to the shipment’s date. You can also open the shipment's details by clicking on the

View

link in the

Status

column.

You’ll see a

Reprint Label

dialog box with some conditions. If you agree to them, check the

checkbox.

5. Click the

Reprint

button to reprint the label.

SendPro Online Shipping Solution

Pitney Bowes

Operator Guide

February, 2018

Page 140 of 349

Summary of Contents for Connect+ 1000






























































































































































































































































































































































Search results

Summary of Contents for Connect+ 1000

Reviews:

Related manuals for Connect+ 1000

Brands by name

Popular brands

Pitney Bowes Connect+ 1000, Operator'S Manual

Search results

Summary of Contents for Connect+ 1000

Reviews:

Related manuals for Connect+ 1000

Brands by name

Popular brands