Pitney Bowes Address Right 200 User Manual Download Page 28

Page: 28 / 59

Quick Menu

The

Quick Menu

button provides access to frequently-used printer functions. To open, press the

Quick

Menu

button on the Control Panel. To close, press the

Quick Menu

button again.

Test Feed/Reprint:

The default is

Test Feed

. If no data is present, this button allows you to test feed

blank sheets of media. If there is a printer jam or double feed, the

Test Feed

button becomes

Reprint

which allows you to recover missed or misprinted pieces. Use the arrows to go back to the initial
misprinted piece (or further back if desired) to start reprinting. Press

Print

to start printing.

Purge Print:

Prints an ink pattern at 600 dpi to clear all of the ink nozzles in all of the ink cartridges

Horizontal Alignment - Heads (1-6):

Adjust offset of individual printheads (side-to-side) up to ±100.0

microns in 5.0 micron increments.

Vertical Alignment - Heads (2-6):

Disables the top nozzles in individual printheads to reduce nozzle

overlap. Adjust up to ±1.0 microns in 0.1 micron increments.

Printer Preferences:

Sets printer features including Purge First Piece, Automatic Feed Start, Keep

Nozzle Alive, Tray Break, Continuous Batch Counter, Feeder Delay, and Invert Printing.

Ink Status:

Shows the percentage of ink remaining in each ink cartridge and the estimated number of

prints remaining at the selected resolution.

Menus and Options

Pitney Bowes

User Guide

November 2019

Summary of Contents for Address Right 200



























































Search results

Summary of Contents for Address Right 200

Reviews:

Related manuals for Address Right 200

Brands by name

Popular brands

Pitney Bowes Address Right 200, User Manual

Search results

Summary of Contents for Address Right 200

Reviews:

Related manuals for Address Right 200

Brands by name

Popular brands